How to apply NicoBloc
When applying more than one drop at a time, you should follow the steps described one by one.That is to say you should not apply all the drops without following the 4 steps below.
Step 1
Make a deep indentation into the cigarette filter with the bottle nozzle
Step 2
Squeeze the correct amount of NicoBloc fluid into the filter immediately before you smoke it.
Follow the complete application process 2 or 3 times as required, applying one drop each time, rather than applying double or treble size drops. Allow each drop to soak in before applying the next drop.
Step 3
Use the nozzle to spread the fluid, so that it covers the total filter surface.
Step 4
Squeeze the filter a few times, this helps it to absorbe the fluid.
Step 5
Light the cigarette and immediately take a strong first draw, before smoking the cigarette as normal.
Note :
- The NicoBloc solution should be applied to the filter immediately prior to smoking.- It should not be applied to all the cigarettes in the pack at the same time.
- The solution remains active for about 5 minutes after being applied.
- Thereafter, it dries out and becomes ineffective.